why dont you just;
use your xp disk to create 2 partitions on 1 drive;
1 insert your XP disk and begin setup in boot mode.
2 when it comes to asking you which partition you want to use,
delete the existing one (this will delete all the data on your drive, so backup)
3 create a new partition. when it asks for a size, change the number to half
of its original value (e.g. 61440{60gb} to 30720{30gb}) and press return
this has created what will be your C: Drive
4 create a new partition in the unused space, this time it should ask for a size
close to what you entered for the first one (usually 8Mbytes less).
this will be your XP drive
exit setup without formatting, we will do that later...
Re-boot the PC and insert 98 disk
format and use 1st partition (c:) for win98
once installed put your XP disk back in
and install xp on the 2nd partition.
when completed your PC will have an auto bootloader on startup
and you'll be able to chose which version of windows
to start.
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP" /fastdetect
C:\="Microsoft Windows 98"
can have 98 for '76 and xp for other things
!!WARNING!!
Be careful editing these files, it is essential you get it rightif you wish to change the timeout or titles of the partitions, you can do so
by editing the system file "Boot.ini" located on the "C:" partition.
the default timeout is "30", but "2-5" is recomended for fast starting.
you can also set 98 to autostart instead of XP by replacing;
default=multi(0)disk(0)rdisk(0)partition(2)\WINDOWS
with
default=C:\
or alternatively, you can use XP to set it;
1 Right-click "My Computer", and click "properties"
2 goto the "advanced" tab and click "settings" on "startup and recovery"